BFT IGEA BT Dual Swing Gate Opener Kit (FL130B)
Product Details
Our BFT IGEA BT electromechanical operator dual kit for swing gates is used to automate two swing gates with leaf lengths up to 10' and weights up to 550 lbs.
Click to read more...
This BFT IGEA BT dual swing gate operator kit includes everything you need to turn your dual swing gate into an automatic gate system. Each arm of the IGEA BT is capable of moving gates up to 10 ft long and up to 550 lbs. Designed for use in residential applications, this gate opener has incredible versatility with levers that permit installation on large sized pillars. Capable of opening gates at a wide angle - up to 125°!
IGEA BT Dual Swing Gate Kit includes:
(2) Igea BT Operators
(1) Libra UL R Control Panel with Incorporated Rolling Code Receiver
(2) MITTO2 12v Two-Channel Rolling Code Transmitters / Remotes
(1) Set of two FL 130B Photocells
(1) AEL 433 Antenna
(2) Sets of Gate Posts and Brackets (Not Pictured)
Smart Technology
Features a state of the art control unit compatible with the EELink protocol.
Safe Use
The IGEA swing gate operator is powered at 24V, and has been specially designed for simpler and faster installation in compliance with the latest safety standards. Thanks to the obstruction sensing device, the operator reverses motion and prevents damage to people and vehicles in the event of detecting contact.
Simpler Installation
BFT features a unique system of coded magnetic limit switches making it possible to reduce the complexity of wiring the low-voltage motors. In this system just a single wire is carried to the control panel instead of the three or five wires that are normally required, thereby increasing both the simplicity and speed of installation. Another benefit of this BFT operator is that the system is able to automatically distinguish between the open limit switch and the closed one, preventing wasted time and wiring errors.
Solar Solution
The BFT IGEA BT is compatible with our Ecosol solar power system, making it easier than ever to save month after month by using this clean and cheap alternative energy option.
Battery Backup
An optional battery backup system is available for the BFT IGEA series of gate operators, taking all the worry out of power outages. The battery backup features a board that charges the battery while power is available, and activates the battery once power is lost - so you don't lose gate operation during a loss of power.
Specifications
Control Panel: LIBRA UL R (Included in kit)
Reversible/Irreversible Operator: Irreversible
Power Supply: 120 V 60 Hz single-phase
Absorbed Power: 0.05 hp (40 W)
Opening: Up to 125°
Thermal Protection: Integrated in the control panel
Opening or Closing Time: 15s
Impact Reaction: Torque limiter integrated in the control panel
Lock: Mechanical opening/closing
Manual Release: Release knob with personalized key
Operating Cycle: Intensive use
Environmental Conditions: From 5°F (-15°C) to 140°F (+60°C)
Degree of Protection: IP44
Operator Weight: 35 lbs
Fuse Value LIBRA Board Transformer: 2A T
Fuse Value LIBRA Board Logic Board: 1A T